Raw Material

Our Rubber Ball With Hole compound from world class suppliers or domestic rubber supplier and customized pantone code is available, hardness from 30 to 90 Shore A.

Size

Standard size with our current mold or customized according to your sample or drawing( 2D, 3D drawing , format STP, DWG, PDF , etc)

Quality and Certificate

We execute ISO9001 quality system and our Rubber Ball With Hole has passed ROHS/Reach/WARS certificate.

Supplier Assessment Report-Haining Maqiao Hengshun Rubber Factory-1(001)

Mold and tooling

In house tool making and free of tooling charge for standard rubber ball, the mould parting line will be sent to customer confirmation.

Management and quality tracking: Strict material traceability under ERP system.

Rubber Ball With Hole process flow

PO confirm---Develop mold according to drawing or sample---Develop chemical formula according to specifications---Mix the raw material as per formula---Prepare and Install the mold on the machine---Preform the rubber compound---Put the compound into mold and vulcanization with certain temperature and pressure---After a while, remove the goods from the mold---Trimming the flash---Inspection---Packing---Shipping

Small MOQ: there’re variety Rubber Ball With Hole in stock, so mini MOQ is acceptable.

Function: dog pet part, drum stick part, toy accessories.

Payment: T/T, L/C, Credit card. USD, RMB ,Euro and so on other currency is available.

Trade Term: EXW, FOB, CIF etc

Package: poly bag and carton(40*32*25CM). If you need pack by pallet or other customized package, it’s also ok.

Shipping method: By air, by sea, by express, multi-modal transport

Sealing is divided into dynamic sealing and static sealing, static sealing is divided into: pad sealing, glue sealing, and contact sealing three categories. Dynamic seal can be divided into two categories: rotary seal and reciprocating seal. The sealing forms can be divided into two categories: static seal between relatively static joint surfaces and dynamic seal between relatively moving joint surfaces.

1. Static seal: according to the working pressure, static seal can be divided into medium and low pressure static seal and high pressure static seal. Medium and low pressure static seal commonly used soft material, gasket wide gasket seal, high pressure static seal with hard material, contact width is very narrow metal gasket.

2. Dynamic seal: According to whether the seal is in contact with the relative moving zero part, it can be divided into contact seal and non-contact seal.

Generally speaking, the contact seal has good sealing performance, but is limited by friction and wear, and is suitable for occasions with low sealing surface line. In the contact seal according to the contact position of the seal can be divided into circular (radial) seal and end seal. End seal is also known as mechanical seal. Non - contact dynamic seal labyrinth seal and dynamic seal.

The former is to use the throttling effect of the fluid between the gaps to limit leakage, leakage is large, usually used in the inter-stage sealing and other sealing; A less demanding occasion. The power seal has centrifugal seal, floating ring seal, spiral seal, etc., is to rely on the power component to produce inpressure head to offset the pressure difference between the two sides of the seal to overcome the leakage, it has a high seal, but the energy consumption is large, and it is difficult to obtain the high pressure head. Non-contact seal, because the sealing surface is not in direct contact, small starting power, long service life.

If the design is reasonable, the leakage will not be too large. But this kind of seal is the use of the equilibrium state of fluid mechanics and work, if the operating conditions change, will cause a large amount of leakage fluctuation. And the market can not buy this kind of seals, basically have user design.