Silicone products are often encountered in the production of a situation. After the product is produced, it is often adsorbed too tightly with the mold, which is difficult to remove, resulting in low efficiency and poor product quality. There are several reasons for this:
1. The material is too sticky and the plasticity is not high.
2. The product structure is complex and there are many vacancies.
3. Mold design is not ideal.
4. The product uses gas phase glue, which is easy to adsorb.
Of course, difficult to release the solution of:
1. Spray release agent before the mold is used, and spray release agent after a period of time
2. The mold surface is coated with teflon.
3. Add internal demoulding when training materials.
4. Regular cleaning and maintenance mold and sand blasting.