1. Since the shape of the rubber parts has a relatively free choice, the stiffness in three directions (axial, radial, torsional) can be appropriately selected;
2. It can be firmly vulcanized with metal, which simplifies the structure of fixing and supporting. Therefore, it can be used to support the load in any of the three directions;
3. The elastic modulus of rubber is smaller than that of metal, which can produce larger elastic deformation;
4. The internal friction of rubber is larger than that of metal, and it has a tendency to increase with the increase of frequency. Therefore, the use of rubber bushings can reduce the resonance amplitude;
5. When the rubber is at a low temperature, the dynamic elastic coefficient will rise sharply. Therefore, when selecting the rubber bushing material, we should strive to improve the high temperature resistance, low temperature resistance, oil resistance and other properties of the material.
