Raw Material

Our Round Rubber Buffer compound from world class supplier or domestic rubber supplier, rubber material and pantone code available, hardness from 30 to 90 Shore A.

Size

Standard size with our current mold or customized according to your sample or drawing( 2D, 3D drawing , format STP, DWG, PDF , etc)

Quality and Certificate

We execute ISO9001 quality system and our Round Rubber Buffer has passed ROHS/Reach/WARS certificate.

Mold and tooling

In house tool making and free of tooling charge for standard rubber buffer, the mould parting line will be sent to customer confirmation.

Management and quality tracking: Strict material traceability under ERP system.

Round Rubber Buffer process flow

PO confirm---Develop mold according to drawing or sample---Develop chemical formula according to specifications---Mix the raw material as per formula---Prepare and Install the mold on the machine---Preform the rubber compound---Put the compound into mold and vulcanization with certain temperature and pressure---After a while, remove the goods from the mold---Trimming the flash---Inspection---Packing---Shipping

Function: shock absorber, damping, anti-vibration

Small MOQ:Have variety Round Rubber Buffer in stock, so mini MOQ is acceptable.

Payment: T/T, L/C, Credit card. USD, RMB ,Euro and so on other currency is available.

Trade Term: EXW, FOB, CIF etc

Package: poly bag and carton(40*32*25CM). If you need pack by pallet or other customized package, it’s also ok.

Shipping method: By air, by sea, by express, multi-modal transport

Rubber shock absorber is a kind of shock absorber made of rubber, which is used in many instruments, such as cars and water pumps. This time, the water pump is taken as an example to introduce the matters about the rubber shock absorber in the installation.

When the rubber shock absorber is installed on the water pump unit, the central axis should be used as a reference and the installation should be symmetrical. Either clockwise or counterclockwise. The general pump unit in the inert block or the four corners of the steel frame, the long side line these positions need to use shock absorbers, about six to install. After installation, check the positions so that they are as compressed as possible when subjected to force.

Rubber shock absorber

When installing, pay attention to the location of the installation. When stationary, the degree of compression can not be too large, and the installation should be carried out according to a certain amount.

During installation, the water pump unit will inevitably move and other operations to facilitate installation. So the support of the ground facing the pump unit must be stable, without shaking, tilt. The shock absorber of water pump unit should be far away from acid, alkali and organic solvent because of the material relationship.