+8618857867896
Search
enLanguage

How does the production of rubber products pass the environmental requirements? The selection principle of rubber material!

Aug 04, 2023

In recent years, China's rubber industry is facing increasing pressure on environmental protection. A series of EU environmental laws and regulations on the export of rubber products and supporting the formation of "green barriers", especially the implementation of the EU RoHS directive on electronic and electrical products on July 1, 2006, the REACH regulations that will come into effect on June 1, 2007, make the rubber industry face a more severe situation.

There are two issues in the environmental protection of the rubber industry: one is to use environmentally friendly rubber products materials, and the other is to minimize the environmental pollution of the rubber production process.

First, environmentally friendly rubber products materials

The rubber products required to be produced do not contain dangerous substances that exceed the limit value, and do not use prohibited dangerous substances to avoid endangering human health.

1. Heavy Metals

The type and grade of raw materials of rubber products will affect the content of heavy metals. Therefore, care should be taken to avoid or reduce the use of raw materials containing chromium and nickel (such as zinc chromium yellow containing hexavalent chromium, antioxidant NBC containing nickel). The chrome plating layer of the mold and skeleton will also bring chromium elements to the rubber, so it is necessary to develop a new chromium plating technology that replaces hexavalent chromium with trivalent chromium. The rubber shoe industry should pay attention to the limit value of heavy metals in textile and leather dyes, and limit the use of metal complex dyes containing copper, chromium and nickel, to avoid the "toxic" investigation in Italy at the end of 2005 due to the detection of high levels of nickel and azo dyes.

The content of heavy metals in rubber products does not only come from one or two key raw materials, but is the sum of all raw materials (including raw rubber) heavy metal content. Although some raw materials contain very small amounts of heavy metals (such as white carbon black and kaolin), it is also necessary to pay attention to "a little adds up".

Since the EU ELV Directive and EEE RoHS directive have been implemented, the formulation design and production process of rubber products to achieve "lead-free" has become an important issue.

① Adopting lead-free vulcanization system

The system composed of vulcanizing agent TCY (2, 4, 6-trimercaptotriazine) and Ca/Mg acid stabilizer, the system composed of thiadiazole vulcanizing agent /BaCO3 acid absorber, and the system composed of vulcanizing agent XL-21 (2, 3) -dimercaptocarbamate methylquinoline)/Ca(OH)2 acid absorber are all lead-free vulcanizing systems of chloroether rubber. The lead vulcanization system that has replaced NA-22/Pb304 or "double salt" has been applied in automotive fuel hose. In addition, the lead monoxide vulcanization system of chlorosulfonated polyethylene rubber (CSM) has serious environmental problems, and can be replaced by lead-free vulcanization system (such as pentaerythritol), or chlorinated polyethylene rubber (CM) in production instead of CSM.

② Cancel the lead vulcanization process of the hose

Replace TPX resin (poly-4-methyl-1-pentene), nylon, polypropylene, or nylon/polypropylene with a plastic coating process. As early as 1972, the carcinogenicity of lead and lead compounds was identified in the International Center for Research on Cancer (IARC) Monographs Vol. 1, and two European Community directives (67/548/EEC and 76/769/EEC) classified lead and lead compounds as hazardous substances and set limits. At that time, the European hose production plant is about to abandon the lead-covered unit, and precisely at this time, China's hose industry set off a boom in the introduction of continuous lead-covered units, has introduced a number of production lines from Europe, some production lines are still in operation. At that time, the cable industry was also promoting the application, and developed domestic lead-covered units. This is due to the lack of environmental awareness and information caused by the decision-making mistakes, we should take caution.

③ Use environmentally friendly adhesives

Some rubber/metal hot vulcanized adhesives (such as Chemlock 220, 250, 252) contain lead compounds in their components, which can cause excessive lead in products. At present, the UK cilbond 24C has been developed, which is in line with the requirements of the International Raw Material Information System (IMDS), lead-free, non-toxic solvent based high-performance adhesive. Used for hot vulcanization bonding between all kinds of rubber and metal, plastic and other hard substrates.

2. Bromine flame retardants

Polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) are banned/restricted in accordance with the relevant EU directives. Although the rubber and plastics industry is currently struggling to find effective flame retardants that can replace decabDE, and the fire service also raised objections, the European Commission adopted a resolution on October 13, 2005, deciding to exempt "decabDE in polymer applications". This appears to have given decabDE legal status for the time being. However, some foreign manufacturers of electrical and electronic equipment still insist on the prohibition/restriction of "monobromide" to "decabromide" diphenyl ether. There are two reasons for this: the EU-D-2003/11/EC directive restricting the use of pentabDE and octabde is still in force and they are not exempt; In the synthesis of decabromodiphenyl ether, there are 2% by-products - octabromodiphenyl ether and nonobromodiphenyl ether.

Tetrabromobisphenol A, another commonly used flame retardant, is also undergoing a "risk assessment" in the European Union.

Therefore, the development and application of halogen-free flame retardants, especially bromin-free flame retardants, is a common urgent task for rubber additive manufacturers and rubber products factories.

3. Polycyclic aromatic hydrocarbons

A total of 16 polycyclic aromatic hydrocarbons (PAHs) are currently restricted in the European Union and other countries, the primary PAH being the well-known benzo (α) pyrene. In recent years, China's exports of electrical and electronic products have repeatedly been returned by European countries, some of which are related to the PAHs standard of rubber and plastic products.

What raw materials bring PAHs detected in rubber and plastic products? This has always been a big problem plaguing enterprises, although the author has tried to consult the literature, has not been able to fully clarify, only the preliminary thought that coal tar and oil are possible suspects, the corresponding main suspect raw materials are carbon black and processing oil.

① Carbon black

The raw oil of carbon black is mainly clarified oil, ethylene tar and coal tar, and the raw oil of carbon black in China is mainly coal tar. Coal tar is an extremely complex mixture, the main components are aromatic compounds and heterocyclic compounds, there are thousands of species, from which there are more than 500 kinds of isolation and identification. By chromatographic analysis of intermediate products of raw oil reaction in various parts of carbon black reactor, it is found that there are many kinds of PAHs, among which the more abundant ones are pyrene, Benzo (a) pyrene, Benzo (c) pyrene and so on. Ethylene tar also contains a certain amount of PAHs. The test shows that the domestic oil furnace carbon black, which is widely used at present, will make the PAHs exceed the standard even if the amount is not large in the compound formulation.

At present, carbon black factories do not provide PAHs content detection reports or control indicators to rubber products factories, which is also a very confusing problem for rubber products manufacturers.

② Processing oil

Rubber processing oil includes aromatic oil, paraffin oil and naphthenic oil. Aromatic oil can not be used for rubber products with environmental protection requirements because it contains a large amount of PAHs, which also limits the application of oil-filled rubber with high aromatic oil (such as SBRl712, etc.). Although we have developed oil-filled rubbers with lower PAHs content (such as SBRl723), the types and amounts of PAHs they contain have not been reported, and their compliance with EU environmental requirements is unknown. In paraffin oil and naphthenic oil, the PAHs content is also very different due to the different origin and processing technology. So far, the author has not seen PAHs data produced by domestic and foreign enterprises producing rubber processing oil, and it is difficult to make environmental evaluation of various oil products.

At present, we are still unclear about the source of PAHs in raw materials, in addition to carbon black and processing oil, there may be many other raw materials that make PAHs exceed the standard, and need to step up screening and determination. Otherwise, once the European Union formally legislates on PAHs, we will be in a very embarrassing situation.

4. Specific amines

The EU Directive 2002/61/EC and the eco-textile standard Oeko-Tex-Standard 100 restrict the sale and use of hazardous substances azo dyes. The so-called "specific amine" refers to the carcinogenic aromatic amines produced from the decomposition of azo dyes under specific (i.e., reduction) conditions, a total of 24 kinds.

Azo dyes are mainly used for textiles and leather, but now buyers are also asking to test for specific amines in rubber products. According to the analysis, some organic pigments (colorants) in the adhesive, especially azo colorants, may contain these specific amines, such as big red powder and gold light red, oil soluble candle red, rubber big red LG and other colorants contain dichlorobenzidine.

Footwear products should pay special attention to the use of cloth and leather whether there are prohibited dyes, now there are more than 300 environmentally friendly dyes to choose from.

5. N-nitrosamine

Some rubber auxiliaries with secondary amine structure react with nitrosation agents (nitrogen oxides NOx) to produce N-nitrosamines with carcinogenic properties. German regulation TRGS552(effective in January 1988) stipulates the prohibition of 12 carcinogenic N-nitrosamines, involving a variety of rubber additives widely used in China. In particular, the "White Paper on the Future Chemical Policy Strategy" published by the European Union, which lists the vulcans DTDM and some thiuram accelerators (such as TMTD, etc.) as chemicals to be phased out within a time limit, is not only a threat to rubber products manufacturers, but also to the tire industry. Therefore, we should use safe and environmentally friendly additives, such as domestic tire factories are replacing NOBS with accelerator NS.

2. Reduce environmental pollution

1. Reduce exhaust emissions

Automobile emissions pollute the air seriously. In order to meet the emission standards, in addition to constantly improving the design of the car itself, rubber products should also take effective measures.

① Reduce fuel transmission rate

For the currently widely used high aromatic unleaded gasoline, fluororubber (FKM) has the best fuel resistance, and its fuel transmission rate is much lower than NBR, so in recent years, the inner layer of fuel hose has the trend of replacing NBR with FKM, and the three-way FKM is better than the binary FKM; The fuel transmittance of NBR with high acrylonitrile content is lower than that of NBR with low acrylonitrile content. The fuel resistance and transmittance of NBR/PVC blend are better than that of NBR with the same acrylonitrile content, and the higher the acrylonitrile content of NBR in the blend, the better the fuel resistance and the lower the transmittance.

For the ethanol gasoline that is being promoted in China, FKM has the best resistance and the lowest transmittance, and is the most suitable for the inner layer of fuel hose. From the cost consideration, NBR/PVC with high acrylonitrile content can also be used.

In order to further reduce fuel emissions, the recent trend of fuel hose is from rubber/rubber composite structure to plastic/rubber composite structure, and then to plastic/plastic composite structure development, the plastic used has very low fuel permeability resistance.

② Do not use additives that can produce N-nitrosamines

③ Improve the heat resistance of the compound

More and more stringent automobile emission standards, forcing automobile manufacturers to further take new measures to improve the fuel combustion rate, the engine under the hood temperature and exhaust emission temperature continue to increase, requiring rubber products to work at a higher temperature, to improve the heat resistance of the rubber is a very important task. For this reason, many seals are made of high temperature resistant fluorine rubber; The rubber material used for automobile radiator hose has changed from the current sulfur vulcanization EPDM 125℃ grade to peroxide vulcanization EPDM 150℃ grade, and then further adopted silicone rubber or AEM(175℃ grade); The use of HNBR/ aramid cord in automotive synchronous belt is a developing trend. Rubber products should also contribute to the protection of the atmospheric ozone layer. The current refrigerant freon will be replaced by the new refrigerant R-134a(tetrafluoroethane), so the rubber material for the production of air conditioning hoses and seals needs to be improved: For the air conditioning hose, the current preferred R-134a low transmission rate of polyamide as the inner layer (CIIR or BIIR can also be used), polyamide as the interlayer, the outer rubber for heat resistant, ozone resistant EPDM, CR, EVM or HNBR; For the sealing parts of new air conditioning system, HNBR is the best.

2. Purify the processing environment

① Smoke

In the process of rubber processing, many processes produce flue gas, especially the flue gas generated in the process of rubber mixing and vulcanization, which is the main channel of environmental pollution in the process of rubber processing. The simple and feasible way to eliminate sulfur gas is to set a ventilation cover on the vulcanization post and make the product cool as soon as possible after mold opening. Rubber vulcanization flue gas catalytic incineration device can also be used, after treatment, the total purification rate of 95%. In addition, because the lead vulcanization process of the hose will produce lead fumes, this process should be abolished as soon as possible. The salt bath vulcanization of the sealing strip can be replaced by a new "green" liquid vulcanization medium instead of the present nitrite vulcanization medium.

② dust

Many rubber compounds are micro-powdery substances, which can easily lead to "pneumoconiosis". In recent years, the rubber industry has achieved good results in reducing dust pollution, especially the production of new process carbon black production lines and the expansion of the application of mixing machines/upper and lower auxiliary machines/automatic batching lines, which have made great contributions to environmental protection.

③ solvent

Many process workers in rubber factories are exposed to solvents, mainly gasoline, benzene, toluene, xylene, ethyl acetate and chlorobenzene (some brands of adhesives).

Measures to prevent solvent poisoning: use non-toxic or low-toxic solvents or solvent-free adhesives, such as adhesives without "triphenyl", hot melt adhesives, water-based adhesives, etc. The exhaust system is set up in the workplace, and the air containing benzene can be sent to the combustion furnace through the exhaust system, and the temperature is 800℃ for combustion, and the benzene is oxidized into harmless C02 and H20, and then cooled to the atmosphere; For the operation point with single organic solvent variety and high solvent content in the air (such as electrostatic spraying, gluing process), the solvent can be recovered by activated carbon adsorption, regeneration and other methods.

④ Noise

The mechanical noise, dynamic noise and electromagnetic noise generated in the process of rubber processing will affect the health of workers. At present, there are two ways to reduce noise: one is to improve the structure of rubber machinery and power machinery equipment, improve the quality of processing and assembly, and take measures to reduce vibration; The second is to take sound insulation and noise reduction measures, such as installing removable sound insulation enclosures on the parts of the mixer, the opening mixer and the sheet press, and setting the exhaust system on the top of the processing equipment, which can reduce the noise to about 80dB(A).

Relevant environmental regulations

Many countries in the world have their own environmental protection laws and regulations, the European Union is the most stringent, but our country is relatively lagging behind. The main directives relating to rubber in important EU environmental regulations (EU-D refers to EU directives below) are as follows:

EU-D67/548/EEC Directive on Classification, Packaging and Labelling of dangerous substances.

EU-D76/769/EEC, the Directive on the Restriction of the sale and use of certain Hazardous substances and products (referred to as the RoHS Directive), has made restrictions on up to 47 hazardous substances, and has been amended several times to issue different directive numbers. For example, EU-D2002/61/EC is the 19th amendment to the Directive [on azo dyes (azo colorants)] and EU-D2003/11/EC is the 24th amendment to the Directive (on pentabromodiphenyl ethers and octabromodiphenyl ethers).

The EU-D94/62/EC Directive on Packaging and packaging Waste sets limits for four heavy metals.

EU-D2000/53/EC, Directive on end-of-life Vehicles (ELV Directive), dealing with lead, cadmium, mercury and hexavalent chromium.

EU-D2002/95/EC, Directive on Electrical and Electronic Equipment (referred to as EEE RoHS Directive), relating to lead, cadmium, mercury, hexvalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, implemented on 1 July 2006. The corresponding Chinese RoHS - Ministry of Information Industry, Environmental Protection Administration and other seven ministries jointly formulated the "electronic information products pollution control management Measures" will be implemented on March 1, 2007.

EU-D2003/113/EC, Directive on the prohibition of phthalate plasticizers.

For polycyclic aromatic hydrocarbons (PAHs), the EU has not issued a formal directive, only a proposal [EU-COM2004(98)], and the limit value indicators currently used are based on recommendations from expert discussions (Berlin, 2005-08-02).

In February 2001, the European Union issued a "Future chemicals policy Strategy White Paper", involving some rubber auxiliaries. On 18 December 2006, the Council of the European Union again

Send Inquiry